What is AS2047 standard for aluminum windows?
AS/NZS 2047 explained for aluminium windows—wind, water, air performance, NCC, WERS, and what to verify before you buy.
Read moreBlog
AS/NZS 2047 explained for aluminium windows—wind, water, air performance, NCC, WERS, and what to verify before you buy.
Read moreLearn how the polyamide break stops heat through aluminum frames—vs standard aluminum, where it helps in cold and tropical climates, and how to verify real thermal break.
Read moreLearn how a thermal break stops heat from crossing aluminum frames—and when non-broken windows still make sense. Compare U-values, PA66 breaks, condensation, and cost before you quote in 2026.
Read moreAluminium frames are low-maintenance—not zero-care. Learn what to clean, how often, and what fails first on coast and inland AU homes.
Read more1.2 vs 1.4 vs 2.0 mm wall gauge, frame depth, and thermal break—how to match aluminum profile thickness to glass span, wind load, and climate without overpaying.
Read moreAluminum vs uPVC isn't a universal winner—compare frame strength, insulation, climate fit, glass, and install quality before you choose.
Read moreDouble vs triple, low-E, SHGC for hot climates, and laminated options—how to match insulating glass to thermal break aluminum frames without overspending.
Read moreAluminum frames can run decades—but seals, glass units, and hardware quit first. See typical ranges, what fails early, and how to extend service life.
Read moreAluminum frames don't rust like steel—but salt, coatings, and hardware still fail. Learn pitting vs rust stains and what to spec for coastal climates.
Read moreExtrusion wall mm, frame depth, and glass—how to spec aluminium windows for wind, AS2047, and AS 1288 without guessing.
Read more